It is still summer, but that does not mean you should not start thinking about furnace repairs. After all, you do not want to be caught off guard when the weather turns cold. Now is the best time to start furnace repairs because you can take advantage of the warmer weather to troubleshoot. For example, if your heater is not heating your home evenly, you can check the ductwork for leaks.
It is a good idea to clean your furnace filter and get any other necessary repairs done now so that you are not scrambling to do them later. By bringing these repairs done now, you can ensure that your home will be warm and comfortable all winter.
Not Producing Enough Heat
A furnace that cannot heat up properly is effectively useless. It defeats the purpose of having a furnace in the first place. A furnace is supposed to make you comfortable by heating your living area when it gets cold outside. If it cannot do that, it is not doing its job.
There could be a few reasons your furnace is not producing enough heat. One possibility is that the furnace is too old and needs to be replaced. Another option is something wrong with the furnace itself, such as a problem with the pilot light or a clogged filter.
If you have an old system, it might not be powerful enough to heat your entire home. In this case, you should think about a newer, more powerful furnace. In either case, if your furnace is not producing enough heat, you need professional furnace repair.
Does Not Receive Power
Some things could be going on. Maybe the breaker has been tripped and needs to be reset. Or, there could be a problem with the wiring. It is also possible that the furnace is faulty and needs to be repaired or replaced.
When your furnace does not turn on, the first thing you should check is the power source. Ensure the heater is plugged into an outlet and the circuit breaker is turned on. If the power source is fine, the next thing to check is the thermostat.
Ensure that it is set to heat and that the temperature is set above the current room temperature. If the thermostat is fine, the next thing to check is the pilot light. If it is out, you will need to relight it. If the pilot light is on, but the furnace still does not turn on, you may need to replace the igniter.
Pilot Light and Ignition Issues
If your furnace’s pilot light keeps flickering off, it may be due to a clogged pilot orifice, low flame setting, or defective safety switch. You can try relighting the pilot light following the manufacturer’s instructions. If it goes out again, try cleaning the pilot light orifice and increasing the flame setting.
If your furnace has electronic ignition, it may need a new igniter. You can check the igniter by visually inspecting it to see if it is cracked or damaged. If it is, you need professional furnace repair.
Conclusion
There are a few common furnace problems that you should be aware of. These include issues with the pilot light, the igniter, and the blower. If you notice any of these problems, you must call a professional to have the furnace serviced. With proper maintenance, your furnace should last for many years.
Before winter comes, you should immediately seek Furnace King. We provide top-notch furnace repair for Saskatoon residents, so we can guarantee that our clients can enjoy a warm and comfortable winter. So, call us now before Jack Frost comes nipping at your nose.
